Industrial Specialties

Asphalt Release

This product is a biodegradable, water soluble, non-flammable concentrate used primarily in the asphalt paving industry for coating the bed of dump trucks to prevent the asphalt from sticking. This product can be diluted up to 30 to 1 with water, and is most effective when applied as a foam. Due to its high concentration and biodegradability this product gives the commercial paver an inexpensive, environmentally friendly alternative to diesel fuel.

pH : 9.0-10.0
Dilution: 4 to 12 oz per gallon
Appearance: Green
Odor: Bland
Package Size: 5, 35, 55

Break Down

A floating grease and scum solvent that is extremely effective in dissolving scum blankets and grease balls in lift stations, sewer lines, and wet wells. In addition it rises and falls with the level of waste and helps to clean the walls of the well. Also acts as a defoamer as well.

pH : N/A
Dilution: RTU
Appearance: Yellow
Odor: Solvent
Package Size: 5, 35, 55 17

Car Wash Concentrate

This concentrate is manufactured from special synthetic detergents and wetting agents to remove dirt, dust, grime and road film from automotive finishes quickly and economically. It contains no film forming soaps. Will not dull or water-spot, even on chrome surfaces. It is so concentrated that as little as three ounces per gallon of water gives loads of suds that clean thoroughly and rinse freely.

pH : 9.0-10.0
Dilution: 3 oz per gallon
Appearance: Green
Odor: Lemon
Package Size: *4×1, 5, 35, 55

Clean-N-Shine

Clean-N-Shine is a high foaming synergistic blend of detergents and proprietary additives, which leave a mono-molecular film to give a high luster. Clean-N-Shine helps to repel dust, retard rusting, and is non-streaking.

pH : 8.0-9.0
Dilution: 3 oz per gallon
Appearance: Yellow
Odor: Bland
Package Size: *4×1, 5, 35, 55

Coil Care

Coil Care is a heavy duty, non-corrosive concentrate that has been formulated for the cleaning of air conditioning coils. Coil Care aids in preventing dust, dirt and other types of bacteria-bearing soil from accumulating on the coils for up to 3 months. Its sustained cleaning action provides 24 hour protection which improves efficiency and saves electrical costs.

pH : 9.0-10.0
Dilution: 32 oz per gallon
Appearance: Amber
Odor: Bland
Package Size: *4×1, 5, 35, 55

Concrete Cleaner

Concrete Cleaner is a 100% active, gold colored blend of powdered cleaning agents that will quickly and easily remove dirt, grease and oil stains from all concrete surfaces. Floors may be cleaned by simply sprinkling the powder on the wetted surface, allowing to stand a few minutes, brushing with a broom or deck brush, and flushing clean. A fluorescent opal dye has been added to insure that the application is even. This product can be used in cleaning concrete surfaces in industrial plants, garages, new and used car lots, parking areas, driveways and sidewalks.

pH : N/A
Dilution: RTU
Appearance: Yellow Powder
Odor: Bland
Package Size: 100 lb

Floc-it

This anionic flocculant is an easy-to-use, effective sanitary and storm sewer cleaner. Applied as directed, it will assist in removing deposits that restrict and clog sewer lines. After cleaning, sewer lines will flow faster with less potential for deposit build-up.

pH : 8.0-9.0
Dilution: Varies
Appearance: Blue
Odor: Bland
Package Size: 5, 35, 55

Emsil

Silicone emulsion for multi-purpose mold release and lubricant applications; such as tire recapping, metal and plastic forming. The submicron particle size of this emulsion offers stability and performance efficiency. The thin parting films are durable, heat-stable and noncarbonizing. For mold release applications, the emulsion should be sprayed or brushed on mold as needed. In certain light-load applications, it can be diluted with up to 10 parts water. For lubrication applications, spray, brush or dip at full strength.

pH : 8.0-9.0
Dilution: Varies
Appearance: White
Odor: Bland
Package Size: *4×1, 5, 35, 55

Liberator

Liberator’s unique formulation stops squeaks, protects metal, loosens rusted parts and frees sticky mechanisms and yet, unlike similar products, does not harm most plastics. Liberator immediately penetrates to free “frozen” or rusted parts while leaving a protective coating to guard against rust and corrosion.

pH : N/A
Dilution: RTU
Appearance: Brown
Odor: Vanilla
Package Size: 12x22oz, 5, 35, 55

Red Hot Sewer Solvent

Red Hot Sewer Solvent is a powerful granular sewer solvent which quickly clears blocked sewers and drain lines. Effective against grease, oil, fibers, sludge, and organic matter.

pH : N/A
Dilution: RTU
Appearance: Blue Powder
Odor: Bland
Package Size: 50 lb

Renew Protectant

Renew’s water based protective shield helps maintain a long lasting attractive appearance while guarding against the damage caused by ultraviolet rays, environmental conditions and everyday use. It preserves virtually all plastic, rubber, vinyl, plexiglass, acrylic, leather and wood surfaces. It leaves a protective coating which is less greasy and which lasts longer than the coating provided by other products. This product’s penetrating formulation creates a barrier which resists cracking, dulling, hardening and fading, which is common in untreated surfaces.

pH : 8.0-9.0
Dilution: RTU
Appearance: White
Odor: Bland
Package Size: 12x22oz, 5, 35, 55

Tire Mark Remover

Tire Mark Remover is a blend of petroleum solvents which are ideal for quickly and easily removing tire and rubber marks on concrete and wooden floors in industrial and warehouse applications.

pH : N/A
Dilution: RTU
Appearance: Green
Odor: Solvent
Package Size: 5, 35, 55